Not work with vehicles with push start button & smart key already. Extra timer delay switch may required for diesel vehicle with engine starting/cranking time more than 3 seconds. This item required to be installed by a professional car alarm installer, Please check if you can find one or not before purchasing!
Wiring diagram is available for reviewing upon request. You need to unlock/release/remove the steering wheel lock if there is one in your vehicle while installation this item. Extra bypass is required for vehicles if there is a chip immobilizer in factory OEM key fob, can work with most universal bypass module.But not compatible with CAN BUS or DATA bypass module. The item equips with 2 key fobs, each time only one key fob works while the other one goes to sleep mode till you activate it. Mute alarm turn on/off setting. Remote trunk release Extra trunk release solenoid kit.
Start the car in cold/hot weather. 18 minutes timer cut off once the car is remote started. Emergency disarm & start the car. Reset switch & programming method. 10p Wire harness x 1.
6p ignition harness x 1. English user manual & installation guide x 1. Pls ensure that the package is undamaged and in original condition when you return it back.
We provide all with 12 months quality guarantee, always strive for a 100% satisfaction from you. BUT is not available once the products are damaged by improper use on the buyers end. Further delay may void your return. Only you are not satisfied with our goods or service, please feel free to contact with us.We will try our best to serve you until you are satisfied. The item "EASYGUARD PKE car alarm system keyless entry push button remote start keyless go" is in sale since Wednesday, November 8, 2017. This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Alarms & Security\Car Alarms & Security Systems". The seller is "easyguard-us" and is located in Zhongshan,Guangdong. This item can be shipped worldwide.