Compatible the following installed Aftermarket Security Systems. RSS-2514XR RSS-2504A RSS-2524 392-127-316 rev-0 BBF 392-127-317 rev-1 BBW 392-127-319 rev-1 XRT 392-127-302 rev-1 HG XRT BBK BBF BBU BBW RS613 RS624 RSS2504 RSS2514 RSS2524 1105 2106 3106 2205A 2205U 4204A 803 801 RS126. This remote will need to be programmed to your vehicle with your vehicle in order to work with your vehicle. Programming Instructions: Four different remote controls can be programmed for a given vehicle. If a fifth remote is added, the first remote is deleted.Note: When the first code learning command is sent, all the old codes are cleared out. Therefore if you want to add a new remote, all the old ones must be reprogrammed as well. One or more remote transmitters can be added. To do this, programming is accessed as follows: 1. Insert key in the ignition and turn to the RUN position. You now have 10 seconds to turn the key from RUN to the STOP position 3 times. If this sequence is correctly carried out, the control module flashes parking lights (4 flashes).
You may then proceed to the next step. Press the LOCK button on the new remote control. When access code of new remote control is memorized, the control module will confirm with flashing parking lights (1 flash). Repeat the above procedures for each remote control that has to be programmed (up to 4 remotes). New remote(s) is (are) now added to the system.
If your vehicle is equipped with a function that automatically sets driver preferences seat, mirrors, etc. And the system is configured to control it, the remote controls programmed in positions 1 and 2 will control the settings for the first driver and the remote controls programmed in posit ions 3 and 4 will control the settings for the second driver. If you only have two remote controls, program the first one twice and the second one twice to occupy the four memory locations of the system.
How to find out if this remote is compatible with your Vehicles installed RKE System. If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first. Check the back of your current or old keyless remote to match FCC ID /Part #s.Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need. Your vehicle will be installed with one of the following keyless entry systems. Standard Keyless Remote Packages: Installed at time of manufacture. Optional Keyless Remote Packages: Installed by a dealer.
Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. No remote keyless entry system at all. The above information can change which remote you need for your installed remote keyless system. The item "Astrostart keyless remote car starter FCC ID J5F-TX60A control key fob keyfob" is in sale since Wednesday, September 16, 2020. This item is in the category "eBay Motors\Parts & Accessories\In-Car Technology, GPS & Security\Dash Cams, Alarms & Security\Remote Entry System Kits".
autoparts" and is located in Wellsboro, Pennsylvania. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Russian federation.